Oxidation-Reduction Molecular Junction Covalent Organic Frameworks for Full Reaction Photosynthesis of H2O2

The full reaction photosynthesis of H₂O₂ that can combine water-oxidation and oxygen-reduction without sacrificial agents is highly demanded to maximize the light-utilization and overcome the complex reaction-process of anthraquinone-oxidation. Here, a kind of oxidation-reduction molecular junction covalent-organic-framework (TTF-BT-COF) has been synthesized through the covalent-coupling of tetrathiafulvalene (photo-oxidation site) and benzothiazole (photo-reduction site), which presents visible-light-adsorption region, effective electron-hole separation-efficiency and photo-redox sites that enables full reaction generation of H₂O₂. Specifically, a record-high yield (TTF-BT-COF, ≈276 000 μM h⁻¹ g⁻¹) for H₂O₂ photosynthesis without sacrificial agents has been achieved among porous crystalline photocatalysts. This is the first work that can design oxidation-reduction molecular junction COFs for full reaction photosynthesis of H₂O₂, which might extend the scope of COFs in H₂O₂ production.     

Comprehensive H2O Molecules Regulation via Deep Eutectic Solvents for Ultra-Stable Zinc Metal Anode

The corrosion, parasitic reactions, and aggravated dendrite growth severely restrict development of aqueous Zn metal batteries. Here, we report a novel strategy to break the hydrogen bond network between water molecules and construct the Zn(TFSI)₂-sulfolane-H₂O deep eutectic solvents. This strategy cuts off the transfer of protons/hydroxides and inhibits the activity of H₂O, as reflected in a much lower freezing point (<−80 °C), a significantly larger electrochemical stable window (>3 V), and suppressed evaporative water from electrolytes. Stable Zn plating/stripping for over 9600 h was obtained. Based on experimental characterizations and theoretical simulations, it has been proved that sulfolane can effectively regulate solvation shell and simultaneously build the multifunctional Zn-electrolyte interface. Moreover, the multi-layer homemade modular cell and 1.32 Ah pouch cell further confirm its prospect for practical application.     

Semiconductor SERS on Colourful Substrates with Fabry-Pérot Cavities

Non-metallic materials have emerged as a new family of active substrates for surface-enhanced Raman scattering (SERS), with unique advantages over their metal counterparts. However, owing to their inefficient interaction with the incident wavelength, the Raman enhancement achieved with non-metallic materials is considerably lower with respect to the metallic ones. Herein, we propose colourful semiconductor-based SERS substrates for the first time by utilizing a Fabry-Pérot cavity, which realize a large freedom in manipulating light. Owing to the delicate adjustment of the absorption in terms of both frequency and intensity, resonant absorption can be achieved with a variety of non-metal SERS substrates, with the sensitivity further enhanced by ≈100 times. As a typical example, by introducing a Fabry-Pérot-type substrate fabricated with SiO₂/Si, a rather low detection limit of 10⁻¹⁶ M for the SARS-CoV-2S protein is achieved on SnS₂. This study provides a realistic strategy for increasing SERS sensitivity when semiconductors are employed as SERS substrates.     

大颗粒磷钼酸铵:制备与结晶动力学(英文)

通过缓慢滴加焦磷酸钾的硝酸溶液到钼酸铵溶液中制得了大颗粒磷钼酸铵(AMP)。研究了AMP的成核速率(G)与晶体生长速率。与晶体生长速率相比成核速率的反应级数更高。最初,大颗粒磷钼酸铵的结晶过程处于相变反应控制的动力学区域,此时溶液的过饱和生成速率比过饱和消除速率高。晶体线生长速率与溶液的过饱和度先增加后降低。在滴加中期,过饱和消除速率增长到与其生成速率相当。在滴加后期,晶体成核速率快速增高,而晶体的线生长速率下降。晶体的成核速率成为过饱和消除的唯一控制步骤。因此,AMP成核大部分是在首先接触到滴加液的局部溶液中完成的。     

AM/AA/APEG/NANB共聚物的合成与性能研究

通过丙烯酰胺(AM),丙烯酸(AA),烯丙醇聚氧乙烯醚(APEG)和N,N-二烯丙基苄胺(NANB)制备共聚物P(AM/AA/APEG/NANB)。确定了最佳反应条件:m(AM)∶m(AA)=6.5∶3,APEG为5 wt%,NANB加量0.2 wt%,pH为7,反应温度40℃,引发剂0.4 wt%。通过IR和1H NMR确定了聚合物的分子结构,并对其进行性能测试。结果表明:2000 mg·L-1的AM/AA/APEG/NANB溶液具有较好的流变性能(120℃,粘度保留率:38.56%;1000 s-1,粘度保留率:17.93%)和抗盐性能(20 000 mg·L-1Na Cl,2000 mg·L-1Mg Cl2或Ca Cl2,粘度保留率分别为22.14%、18.34%和15.33%),且提高采收率可达16.12%。     

Mesoporous Carbon Nanofibers Embedded with MoS2 Nanocrystals for Extraordinary Li‐Ion Storage

MoS₂ nanocrystals embedded in mesoporous carbon nanofibers are synthesized through an electrospinning process followed by calcination. The resultant nanofibers are 100–150 nm in diameter and constructed from MoS₂ nanocrystals with a lateral diameter of around 7 nm with specific surface areas of 135.9 m² g^?1. The MoS₂@C nanofibers are treated at 450 °C in H₂ and comparison samples annealed at 800 °C in N₂. The heat treatments are designed to achieve good crystallinity and desired mesoporous microstructure, resulting in enhanced electrochemical performance. The small amount of oxygen in the nanofibers annealed in H₂ contributes to obtaining a lower internal resistance, and thus, improving the conductivity. The results show that the nanofibers obtained at 450 °C in H₂ deliver an extraordinary capacity of 1022 mA h g^?1 and improved cyclic stability, with only 2.3 % capacity loss after 165 cycles at a current density of 100 mA g^?1, as well as an outstanding rate capability. The greatly improved kinetics and cycling stability of the mesoporous MoS₂@C nanofibers can be attributed to the crosslinked conductive carbon nanofibers, the large specific surface area, the good crystallinity of MoS₂, and the robust mesoporous microstructure. The resulting nanofiber electrodes, with short mass‐ and charge‐transport pathways, improved electrical conductivity, and large contact area exposed to electrolyte, permitting fast diffusional flux of Li ions, explains the improved kinetics of the interfacial charge‐transfer reaction and the diffusivity of the MoS₂@C mesoporous nanofibers. It is believed that the integration of MoS₂ nanocrystals and mesoporous carbon nanofibers may have a synergistic effect, giving a promising anode, and widening the applicability range into high performance and mass production in the Li‐ion battery market.     

Palladium-catalyzed ortho-selective C–H bond chlorination of aromatic ketones

A palladium-catalyzed ortho-selective C–H bond chlorination reaction for the preparation of 2-chloro aromatic ketones was described. Both electron-withdrawing and electron-donating groups on the aromatic rings are well tolerated under the optimized conditions. The 2-chloro aromatic ketones obtained by our method could be applied to synthesize the derivatives of 1H-indazole or benzo[d]isoxazole.     

定量核磁共振波谱法同时测定中药虎杖中白藜芦醇和虎杖苷的含量

建立了定量核磁共振波谱法同时测定虎杖中白藜芦醇和虎杖苷的方法。样品用80%乙醇和丙酮两次超声提取净化,再用定量核磁共振波谱法测定。考察了样品预处理和核磁共振实验条件对测定结果的影响,选择氘代二甲亚砜-重水(10∶1,V/V)为溶剂,用基准物质邻苯二甲酸氢钾标定的2,3,5-三碘苯甲酸为内标,选择脉冲延迟时间为5 s,采样次数为32次。定量峰为6.388~6.391(白藜芦醇:H-2,6,d,2H)和6.322~6.330(虎杖苷:H-4,t,1H)。结果表明,NMR测定的精密度均小于0.6%,线性相关系数(r)均大于0.999,白藜芦醇和虎杖苷的检出限分别为0.23和0.24 g/L,定量限分别为0.69和1.57 g/L,包括样品提取过程的回收率分别为97.7%~103.5%(RSD=2.4%)和94.5%~99.2%(RSD=1.6%),显示出定量核磁共振法在中药定量时的可靠性。实际测定4种虎杖饮片及配方颗粒样品中白藜芦醇和虎杖苷含量分别为3.57~5.69 mg/g和12.73~24.07 mg/g。     

Fabrication of microporous membranes from melt extruded polypropylene precursor films via stretching: Effect of annealing

In this work, the effects of annealing conditions on the microstructure of polypropylene(PP) precursor films and further on the porous structure and permeability of stretched membranes were investigated. Combinations of WAXD, FTIR, DSC and DMA results clearly showed the crystalline orientation and crystallinity of the precursor film increased with annealing temperature, while the molecular chain entanglements in the amorphous phase decreased. Changes in the deformation behavior suggested more lamellar separation occurred for the films annealed at higher temperatures. Surface morphologies of the membranes examined by SEM revealed more pore number and uniform porous structure as the annealing temperature increased. In accordance with the SEM results, the permeability of the membranes increased with annealing temperature. On the other hand, it was found that 10 min was almost enough for the annealing process to obtain the microporous membranes with an optimal permeability.     

A Tale of Copper Coordination Frameworks: Controlled Single‐Crystal‐to‐Single‐Crystal Transformations and Their Catalytic CH Bond Activation Properties

Metal–organic frameworks (MOFs), as a class of microporous materials with well‐defined channels and rich functionalities, hold great promise for various applications. Yet the formation and crystallization processes of various MOFs with distinct topology, connectivity, and properties remain largely unclear, and the control of such processes is rather challenging. Starting from a 0D Cu coordination polyhedron, MOP‐1, we successfully unfolded it to give a new 1D‐MOF by a single‐crystal‐to‐single‐crystal (SCSC) transformation process at room temperature as confirmed by SXRD. We also monitored the continuous transformation states by FTIR and PXRD. Cu MOFs with 2D and 3D networks were also obtained from this 1D‐MOF by SCSC transformations. Furthermore, Cu MOFs with 0D, 1D, and 3D networks, MOP‐1, 1D‐MOF, and HKUST‐1, show unique performances in the kinetics of the C?H bond catalytic oxidation reaction.